flashjae.blogg.se - november 2022

How to install kaseya agent in the he endpoints

#How to install kaseya agent in the he endpoints how to
#How to install kaseya agent in the he endpoints update
#How to install kaseya agent in the he endpoints software
#How to install kaseya agent in the he endpoints password

#How to install kaseya agent in the he endpoints update

The threat actors behind the REvil Cyberattack pushed ransomware via an update of Kaseya’s IT management software. All other tradenames are the property of their respective owners.A massive supply chain ransomware attack took place recently. WatchGuard and the WatchGuard logo are registered trademarks or trademarks of WatchGuard Technologies in the United States and/or other countries. The new device name appears in Network Monitor. Select Discovery > Networks > Discovered Devices.SNMP monitors information appears on the Monitors tab for the monitored device.īecause of security programs or the firewall configuration, Kaseya may set the name of the discovered device to unknown-MAC address. 1.3.6.1.6.3.1.0įor details about Firebox MIB objects, see: If the OID value is a string, from the Value type drop-down list, select Text. You can type the OID or select it from the MIB tree. Configure the Object Identifier ( OID).When the gateway installation is done, the page looks like this: Select Network Monitor > Monitoring > View > Gateway (WG).In this example, two Fireboxes were discovered because two Fireboxes on this LAN are configured with SNMP enabled. Select Discovery > Networks > Discovered Devices to see discovered devices.Click while the network scan is in progress to check the process. Select Discovery > Networks > By Networks > Scan Now to start the scan.Configure the same SNMP authentication method, encryption method, and credentials that you configured on the Firebox.Select Network Monitor > Monitoring > View > group (KNM).In the dialog window that opens, type the gateway name.Leave the Community String text box empty.Select Discovery > Networks > By Networks.Probe the computer shown in Networks > By Agent.This computer must be in a LAN that connects to the WatchGuard Firebox. Download and install the Kaseya Agent on a probe computer.If you connect to an optional interface, specifyAny-Optional instead of Any-Trusted. Add an SNMP packet filter policy for traffic from Any-Trusted to Firebox.In the User Name text box, type WatchGuard.

#How to install kaseya agent in the he endpoints password

In the Password and Confirm text boxes, type the encryption password.

From the Privacy Protocol drop-down list, select DES.

In the Password and Confirm text boxes, type the authentication password.

From the Authentication Protocol drop-down list, select SHA1.

From the Version drop-down list, select v3.

You must configure the SNMP settings on the WatchGuard Firebox before you use Kaseya to discover it. This diagram shows the test topology used in this integration:

Probe IP address 10.138.111.2 installed on Windows Server 2012 Standard Edition.

Firebox or WatchGuard XTM device installed with Fireware v11.10.x, with Interface 1 enabled as a trusted interface with the IP address 10.138.111.83 (you can also use an Optional interface).

#How to install kaseya agent in the he endpoints software

The hardware and software used to complete the steps outlined in this document include:

#How to install kaseya agent in the he endpoints how to

This document describes how to use Kaseya to discover and monitor a WatchGuard Firebox.

RMM agents are installed on MSP customer endpoints to discover IT assets and remotely monitor and manage them. Kaseya® is an RMM (Remote Monitoring and Management) tool used commonly among MSPs (Management Service Providers).